Double inlet direct coupling engines and impeller with forward curved blades. The ability to adjust the speed using a specially designed speed variator. hoods are equipped with inertial labyrinth antigrease filters in stainless steel. The inertial filter takes advantage of the compressions and expansions of the air forced to pass through the slots of the filtering structure. The following benefits are therefore achieved: high degree of separation of fat (up to 70%), high capacity air distribution on the surface of the hood, effective flame retardant barrier.


Check with a qualified HVAC contractor and mechanical engineer and
or local codes for makeup air requirement. This is important to ensuremaximum performance from any ventilation product.
All CFMs are based on tests at 0.1 static pressure: without applying static pressure, CFM would be greatly overstated.
Straight runs and gradual turns are best; for example, each 90º elbow is equivalent to 5-10 feet (1.52-3.05 cm) of straight run.
Never use flexible duct; it creates back pressure/air turbulence and greatly reduces performance.
Proper performance is dependent on proper ducting; make sure that a qualified and trained HVAC contractor is used.


Clean the surfaces daily and thoroughly with a damp cloth. You can use soap and water or ordinary detergents provide they contain no abrasives or chlorate substances.

Planning notes


WIDTH: 2289 mm | DEPTH: 707 mm | HEIGHT: 857 mm